Brand
New Factory Sealed US Retail Box Lifetime Warranty from
Intel Includes Regular Bracket and LOW PROFILE Bracket
Product Features
Permits easy (plug-and-play), cost-effective
10/100/1000 migration over standard Cat-5 cabling
Provides multi-Gigabit scalability and increased
uptime through advanced server features
Intel SingleDriver technology provides a common
Gigabit Ethernet driver suite
Full-duplex capable; features Intel PROSet II utility
and auto-negotiation
Includes optional-use low-profile bracket for high-density, rack-mounted
servers
Technical Details
Model: PWLA8492MT
Connectors: 2 RJ-45
Standards: 10BASE-T,
100BASE-TX, 1000BASE-T
Wiring: Cat-5, 4-pair
Auto-negotiation: Yes
Full-duplex capable: Yes
Cable distance: 100m
Drivers: Intel
SingleDriver technology (only 1 driver needed for all Intel PRO/1000 single
and dual-port network adapters)
Network-management: Wired
for Management (WfM) Baseline v2.0 Enabled for Servers, DMI 2.0 Support, WMI
and SNMP-manageable, Offline Diagnostics, Dynamic Cable Diagnostics, Intel
Boot Agent (PXE 2.1 compliant), ACPI Power Management, Wake on LAN, and PXE
2.0
NOS software support:
Supports: Microsoft Windows Server 2003 and 2000, Microsoft Windows XP 32- and
64-bit Editions, Windows NT* 4.0, Linux 2.4.x or later (32- and 64-bit),
FreeBSD 4.x or later, Novell NetWare 4.11, 4.2, 5.0, 5.1, 6.0, SunSoft Solaris
7, 8, and UnixWare 7.x and OpenUNIX 8 (ddi8), SCO5
Software features:
Adapter Fault Tolerance, Switch Fault Tolerance, Adaptive Load Balancing, Fast
EtherChannel (when used with a capable switch), Gigabit EtherChannel (when
used with a capable switch), IEEE 802.3ad (when used with a capable switch),
Test Switch Configuration, PCI Hot Plug and Active PCI, IEEE 802.1Q VLANs,
IEEE 802.3x Flow Control, TCP Checksum Offload, IEEE 802.1p, TCP
Segmentation/Large Send Off-load, Interrupt Moderation, and Save and Restore
Data rates supported: Per
port: 10,100,1000 Mbps
Data-transfer mode:
Bus-master DMA
Bus type: PCI/PCI-X
Bus width: 32- or 64-bit
Bus speed (MHz):
33/66/100/133
Onboard memory: 128 KB
Interrupt levels: INTA
IEEE Support: 802.3ab
Hardware certifications:
FCC A, CE
Controller-processor:
Intel 82546
Typical power consumption: 1A at +5VDC
Environmental: Operating
temperature 0 to 55 degrees C; operating humidity: 85 percent at +55 degrees C
Intel's
PRO/1000 MT dual-port server adapter supports the Gigabit Ethernet industry-wide
networking standard with full IEEE 802.3ab compatibility. Further broadening
your deployment options, the adapter supports most NOSs. Intel's innovative
SingleDriver technology provides a common Gigabit Ethernet driver suite, while
the product's backward compatibility with previous generations of Intel PRO/1000
network adapters reduces your support costs and simplifies installation and
maintenance.
This flexible, auto-sensing adapter works in a variety of bus types,
including 64- or 32-bit PCI-X 1.0 or PCI 2.2 buses. It includes
remote-management support (WfM, RIS, SNMP/DMI) as well as Intel's 82546 Gigabit
controller with Interrupt Moderation, which ensures high performance,
reliability, and low power use.
The adapter's advanced cable diagnostics dynamically tests and reports
network problems (error rate, cable length) and automatically compensates for
cable issues (cross over cable, wrong pin-out/polarity). And compatibility with
the large-send-off-load/TCP segmentation offload feature of Microsoft Windows
Server 2003, 2000, and XP means you'll enjoy wire-speed performance with low CPU
use.
An advanced, newly expanded server features Intel ANS software, which
increases uptime with redundant, teamed connections and scales bandwidth by
balancing network traffic across multiple server connections. Switch Fault
Tolerance and a Test Switch Configuration test compatibility and maintain
uptime. Compatibility with Fast Ethernet reduces training costs and lets you
ramp rollout quickly. You'll get Gigabit speeds on Category-5 cable networks
without costly cable replacement.
Finally, the adapter's auto-sensing, self-configuring 10/100/1000 Mbps
performance permits migration to faster networks easily and inexpensively. The
adapter will automatically sense when the network is able to support a faster
speed and will self-configure to save IT staff time, money, and server
downtime.
Full-height and low-profile, the adapter includes screw-on brackets for easy
placement. For installation in high-density 1U and 2U servers with a low-profile
PCI, the full-height bracket can be easily swapped out and replaced by a
shorter, low-profile bracket (both brackets supplied).
Product
Description Conserve valuable PCI slot space in servers, eliminate server
bottlenecks and migrate existing Category-5 networks to Gigabit Ethernet easily
and cost-effectively with the Intel PRO/1000 MT Dual Port Server Adapter.
Featuring flexible, auto-negotiating 10/100/1000 Mbps performance, the Intel
PRO/1000 MT Dual Port Server Adapter is designed to automatically scale with
growing networks.Enhance server performance further by teaming the two
connections together or team with other Intel PRO Server Adapters using Intel's
advanced server feature software to achieve multi-Gigabit scalability and
redundant failover capability. A compact form factor and swappable low-profile
bracket allow this dual port Gigabit adapter to fit in even high-density,
rack-mounted 1U and 2U servers. With a flexible design that fits almost any type
of PCI bus, the standards-based management features and wide network operating
system support help to ensure extensive compatibility with the latest server and
networking environments.
